| tirestorm9's Forum Info |
| Joined: |
11-13-2021 |
| Last Visit: |
(Hidden) |
| Total Posts: |
0 (0 posts per day | 0 percent of total posts)
(Find All Posts)
|
| Total Threads: |
0 (0 threads per day | 0 percent of total threads)
(Find All Threads)
|
| Time Spent Online: |
(Hidden) |
| Members Referred: |
0 |
| Reputation: |
0
[Details] |
|
|
| Additional Info About tirestorm9 |
| Bio: |
Where is the water in my toilet tank?
Are your toilet tanks empty after flushing? When your toilet tank does not refill at all, or comes in slowly, it can be a frustrating issue for home and business owners. When the tank is empty, the toilet cannot be flushed. Fortunately, this plumbing problem can usually be rectified without having to replace the toilet. At Candu Plumbing, we proudly offer high quality residential and commercial plumbing services, including toilet repair, replacement, and installation, to communities throughout California and Arizona. These are some of the most common causes for a toilet not to have water in it.
Problems with Float Ball
An older toilet will probably use a float ball. It is used to control the level of water inside your tank. The floating structure will cut off the incoming flow of water when it reaches a certain height. On the other hand, if the float ball is too low, the proper amount of water will not enter the toilet. Remove the tank's lid and carefully bend the float arm upward to solve this problem. Float ball movement should be aided by this action and allow for enough water to enter the aquarium. Your problem may persist if it remains low and this component needs to be replaced.
Trip Assembly Issues
Trip assemblies are attached to the flush handle outside the tank. It can fail to initiate a flush cycle if it has shifted position or if it has become damaged. The trip assembly should be inspected after lifting the tank lid. This may be your culprit if it looks broken, warped or deteriorated. Alternatively, buy a new trip assembly and replace the worn-out part.
Trouble with Fill Valve
The float cup, rather than the traditional float ball, is used on modern toilets. A correctly functioning fill valve attached to the cup is necessary for this part to function. Otherwise, water will not enter the tank. You can evaluate this issue by removing the lid and looking for the rod that connects the fill valve to the float cup. By turning the screw clockwise on the rod, you should raise the float cup, which in turn raises the water level. Test the result by flushing the toilet. To adjust the screw counterclockwise if too much water is coming in, turn it until it is positioned appropriately.
Are You Having Problems with Your Toilet? Call Candu Plumbing Today
Have you tried to fix the above issues, but your toilet is still not working? You can get the professional service you need by contacting Candu Plumbing. Our plumbers are licensed, certified, and insured. Our office can provide more details about our wide range of services or schedule an appointment with a nearby plumber in your Arizona or California area city.
http://www.docspal.com/viewer?id=- |
| Sex: |
Female |
|
